Used 50 Litre / 11 Gallon Stainless Steel Mixing Tank / Vessel 316L – Stock Ref: CB3603 ASME VIII Div 1 Insulated with 40mm. phenolic foam c/w vapour barrier. Cladding 2.5/2.0 stainless 304. (81L to T/L, 93 L Total) Connections: 1 x 6″ flange ANSI 150 – Agitator 1 x 2″ Triclover – Nozzle Spray ball 1 x 1 ½” Triclover – Liquid Inlet & Dip Pipe 1 x 1 ½” Triclover – Recycle & Dip Pipe 1 x 1″ Triclover – Vent 1 x 4″ Triclover – Sight glass 1 x 1″ Triclover – Bursting Disc (Incomplete) 1 x 1″ weld-in Special – Ingold Sample Point (incomplete) 1 x ¾” Weld-in special – Thermopocket 1 x 1 ½” BSP socket – PH probe (incomplete) 1 x 2″ Weld In special – level probe (incomplete) 1 x 2″ Triclover – Conductivity Probe (incomplete) 1 x 2″ Triclover – Outlet Valve Internal welds ground smooth Internal surface polished to finish of 0.39 – 0.51 Ra External surface polished to finish of 0.51 – 0.64 Ra Fabricated Weight 130 kgs, weight full of water 223 kgs ”Lightnin” Mixer, Model: HS25 NX Motor, BCPM, Inverter Rated, ).01-0.25 kW 140-170 rpm, 2A 3 PH, 380v @50HZ NOTE: – Although these vessels are designed as pressure vessels they were run under atmospheric conditions and the mixer units are not fitted with high pressure seals. Operating Pressure Atmos Design Pressure 7.0/4.2 BARG, 0 BARA Test Pressure 10.5 BARG Design Temp 95/155/0°C Operating Temp +2 to +80°C Tank is supported on 3-off S/S tube legs with foot plates.
| Capacity | |
|---|---|
| Accessories | |
| Materials | |
| Orientation |
Equipment to sell? We are interested.
