Used 50 Litre / 11 Gallon Stainless Steel Mixing Tank / Vessel 316L – Stock Ref: CB3603

ASME VIII Div 1
Insulated with 40mm. phenolic foam c/w vapour barrier. Cladding 2.5/2.0 stainless 304. (81L to T/L, 93 L Total)

Connections:
1 x 6″ flange ANSI 150 – Agitator
1 x 2″ Triclover – Nozzle Spray ball
1 x 1 ½” Triclover – Liquid Inlet & Dip Pipe
1 x 1 ½” Triclover – Recycle & Dip Pipe
1 x 1″ Triclover – Vent
1 x 4″ Triclover – Sight glass
1 x 1″ Triclover – Bursting Disc (Incomplete)
1 x 1″ weld-in Special – Ingold Sample Point (incomplete)
1 x ¾” Weld-in special – Thermopocket
1 x 1 ½” BSP socket – PH probe (incomplete)
1 x 2″ Weld In special – level probe (incomplete)
1 x 2″ Triclover – Conductivity Probe (incomplete)
1 x 2″ Triclover – Outlet Valve

Internal welds ground smooth
Internal surface polished to finish of 0.39 – 0.51 Ra
External surface polished to finish of 0.51 – 0.64 Ra
Fabricated Weight 130 kgs, weight full of water 223 kgs

“Lightnin” Mixer, Model: HS25 NX
Motor, BCPM, Inverter Rated, ).01-0.25 kW
140-170 rpm, 2A 3 PH, 380v @50HZ

NOTE: –
Although these vessels are designed as pressure vessels they were run under atmospheric conditions and the mixer units are not fitted with high pressure seals.

Operating Pressure Atmos
Design Pressure 7.0/4.2 BARG, 0 BARA
Test Pressure 10.5 BARG
Design Temp 95/155/0°C
Operating Temp +2 to +80°C

Tank is supported on 3-off S/S tube legs with foot plates.